peperoni

Stiefmuetterchenweg 26
22607 Hamburg
Germany

 
 

Products

Here you can order products we have developed for the lighting industry. Some of them can be found in the portfolio of major lighting companies.
Some items are in stock, all are available to OEMs. Please feel free to contact us.

Whatever you need, there is a solution for it
Give us a call under +49 / 40 / 600 877-51

   

The smallest real DMX512 tester on the market

MicroTest tests all parameters relevant to DMX512. Results are indicated via a blinking multi color LED. MicroTests full metal housing is designed as keyring pendant to withstands hardest stage environments. It does not require any battery and is therefore perfectly suitable for harsh all day use.

MicroTest test the following parameters: Break > 88 µs, Mark-after-Break > 4 µs, bit clock = 250kbit, data transmission format 1 start-, 8 data- and 2 stopbits, startcode = 0 and all for both polarities. Hence it clearly identify DMX512 lines from broken cables, damaged transmitters, any other lines.

MicroTest is compatible with DMX512, DMX512/1990, DMX512-A and RDM.

   

USB DMX512 transmitter interface

The electronic fits completely into an original Neutrik™ plug without any extension. The Rodin1 communicates via USB2.0 and is fully compatible with the DMX512, DMX512/1990 DMX512-A and RDM.

The Rodin1 is open to all developers for use in their own software. All interfacing and driver specifications are provided on request.

You can although buy this product at E:Cue™, Apogee™and Madrix™ ready to go with their software.

   

USB DMX512 receiver interface

The electronic fits completely into an original Neutrik™ plug without any extension. The Rodin2 communicates via USB2.0 and is fully compatible with the DMX512, DMX512/1990 DMX512-A and RDM.

The Rodin2 is open to all developers for use in their own software. All interfacing and driver specifications are provided on request.

   

USB DMX512 transmitter and receiver interface

The electronic fits completely into slightly modified Neutrik™ plugs. The Rodin3 communicates via USB2.0 and is fully compatible with the DMX512, DMX512/1990 DMX512-A and RDM.

The RodinT is open to all developers for use in their own software. All interfacing and driver specifications are provided on request.

 

USB DMX512 interface PCB with two optically isolated transmitters and one optional receiver

All three universes are fully optically isolated against the USB and buffered. The USBDMX21 communicates via USB2.0 and is fully compatible with the DMX512, DMX512/1990 DMX512-A and RDM. It can be connected to computers either via USB-B connector or via 10pin connector. This makes the USBDMX21 ideal for direct mounting into PC cases.

The USBDMX21 is open to all developers for use in their own software. All interfacing and driver specifications are provided on request.

   

Centronics printer-port DMX512 interface family

LPR2DMX1 - free hardware project

LPR2DMX2 - two universes transmitter, unbuffered

LPR2DMX3 - one universe transmitter, 65 bytes buffer

Power-supply and DMX are connected via D-SUB 9 jack.

The LPR2DMX family of DMX512 interfaces is open to all developers for use in their own software. All interfacing and driver specifications are provided on request.

 

DMX to Midi converter interface

DMX2Midi is a full featured DMX to Midi converter interface housed in a 19" 1HE case. It has switches for power and DMX512 start address on the front as for Midi channel on the back.The mapping of DMX512 to Midi data is very flexible. The actual programming is done prior delivery in factory according to customers needs.

Its build in all range uninterruptible power supply makes it ideal for use all over the world. The DMX512 to Midi mapping is programmed

   

USB DMX512 interface with one optically isolated transmitter and one optically isolated receiver

The USBDMX X-Switch is pepperonis first USB DMX512 interface with individually fully optically isolated transmitter and receiver housed in a 19" 1HE case. The interface is bus powered and hence does not need any extra power supply. It build in RS485 transceivers are speed-limited to minimize problems caused by bad cable or missing termination and fully protected against electrostatic discharge.

The USBDMX X-Switch is open to all developers for use in their own software. All interfacing and driver specifications are provided on request.

 

High power LED spot

Small, compact and very bright. The PEPLed57 produces a stunning light output of 1300 footcandles in one foot distance while the PEPLed111 achieves 2200 footcandles. The LED based lighting system produces bright light with no heat and offers a full range of computer controlled colors. The PEPLed fixtures series offer even on direct view a very smooth field of one out of more then 16 million colors. The maximum power consumption of a PEPLed57 is only 6W but has the same light output like a 20 W halogen bulb. Light weight aluminum construction (PEPLed57: 270g and PEPLed111: 350g), familiar housing (PEPLed57: par16 and PEPLed111: par20).

   

Three wire chain of individually controllable RGB-LEDs

Each PEPLedDot is just 13x7mm in size but contains a micro controller, a three channel dimmer pack and a high power full color LED. When mounted on a three wire chain all units will address themselves automatically and from then on the user can control each LED individually over the entire RGB surface.

This makes the PEPLedDot ideal for any kind of application where fancy effects are desired but huge wire trees and large support structures are to be avoided. Chains of PEPLedDots can be controlled either via PC or via DMX.

   

PEPLedDots on stripes

Based on the PEPLedDot principle the PEPLedStripe contains 10 dots on a PCB sized 500x14mm. That are 10 all individually controllable high power RGB LEDs which can be further linked together to other PEPLedStripes or PEPLedDots. The PEPLedStripes long PCB makes is ideal for large installations where lines or areas of LEDs are to be installed. Two stripes can also be mounted back-to-back to comprise a string illuminating the whole sphere.

Like PEPLedDots the PEPLedStripes can be controlled either via PC or via DMX.

   

Full digital DMX512 dimmer

The DigiDimm is a very flexible and customizable full digital DMX512 dimming platform. Each channel is equipped with heavily overrated next generation triacs and large power coils. The heart of DigiDimm is its PLL (Phase-Locked-Loop) which exactly locks to the mains frequency and thereby guaranties highest dimming quality. Selectable dimming curves especially corrected for phase-cut dimming are 115V and 230V either switching or dimming linear in voltage or power.

DigiDim is housed in a rugged 19" 2HE case optimized for heavy road use.

Other configurations on request.

   

Full digital DMX512 switch

The DigiSwich is a very flexible and customizable full digial DMX512 switching platform. Each channel can be equipped with different switching modules depending on customers needs.

On display is a 12 x 2kW switch equipped with full electronic drivers switching exactly at zero-crossing and thereby avoiding any distortions and stress to the load.

Other configurations on request.